Messages: Please use the forum for our discussions & Q&A.

News: It is reported that iTunes 9 is compatible with jailbroked iPhones... Now I got an iPhone 3GS. I will be posting something about it...

Sponsors links:

Sunday, December 31, 2006

Unlock/Repair PDS using GOT_MOTO

Unlock/Repair PDS using GOT_MOTO without Testpoint
Update on 1 March 2007: We have found a new & free way to unlock or repair pds for V360/L7. GOT_MOTO will be obsolete.

It is reported that you can use a software GOT_MOTO to unlock or repair PDS without testpointing. It is really a good news, because testpoint is very troublesome. It can be used to unlock the SIM lock and remove the sticky firmwares, such as AER/E0R. Tested successfully on V360 and L7.

How to get GOT_MOTO:
Go to got_moto website (link removed, see update). Follow the instruction "!!!For getting FREE testing account you have to send an e-mail to (address removed, see update) to get your username and pass!!!" to get a 30-day-free testing account. After you get the account, go back to the same site to login.
Unfortunately GOT_MOTO is no longer free. They will not issue free account any more. To make things worse, it is reported that they got our email addresses sold to spam ads, so be cautious! You may want to try Disassemble, testpoint & unlock/repair pds.
It is reported that kapersky lab reported a rootkit in GOT_MOTO.exe. This virus will fill zero your hard disks and reinstall windows.

Please backup your existing firmware or data before proceeding. DO IT AT YOUR OWN RISKS.

WARNING: Caution should be given to SLVR L7 with 0A.20 bootloader or R4517 firmware. Failure on such phone was reported.

Steps to unlock SIM lock:
1. Connect your phone to computer via USB, and start GOT_MOTO.
2. Select your phone model and firmware version;
3. Tick "Easy Skip TP" checkbox, click "Unlock" tab, press "Unlock Network" then follow instructions.

Steps to repair PDS and get rid of sticky firmware:
1. Connect your phone to computer via USB, and start GOT_MOTO.
2. Click "Repair" tab, then "Set Blank Mode", then "Repair PDS" and "Remove Blank Mode";
3. Flash to a full-flash MonsterPack of your choice;
4. If there's problem, repeat step 1 = Click "Repair" tab, then "Set Blank Mode", then "Repair PDS" and "Remove Blank Mode";

GOT_MOTO Supported Models:
C38x ( R364_G, R365_G , R366_G)
C390 ( R368_G)
C65x ( R364_G , R365_G)
C975 (R24_U_xx_2x_xx, R245_U_xx_2x_xx ,R26_U_xx_2x_xx , R24_U_xx_3x_xx, R245_U_xx_3x_xx , R26_U_xx_3x_xx)
C980 (R24_U_xx_2x_xx, R245_U_xx_2x_xx, R26_U_xx_2x_xx, R24_U_xx_3x_xx, R245_U_xx_3x_xx ,R26_U_xx_3x_xx)
E1 (R373_G)
E1000 (E1000_U,R26LD_U)
E1070 (R25221LD_U , R252211LD_U)
E375 (R3721_G)
E378i (R3722_G)
E39x (R372_G)
E550 (R376_G)
E680 (R51_G)
E680i (E680I_G)
E770 (R25221LD_U, R252211LD_U)
E79x (R373_G)
K1 (R4527_G)
L2 (R3511_G, R3517_G)
L6 (R3511_G, R3517_G, R3443H1_G)
L7 (R4513_G, R44419_G, R4517_G)
U6 PEBL (R478_G)
V3 RAZR (R374_G)
V3b (R37AV3_G)
V3i (R479_G, R4441D_G, R47A_G, R3443H3_G)
V3r (R4515_G, R3443U2_G, R3443U5_G)
V3x (R25221LD_U, R252211LD_U, R25227LD_U)
V6 (R478_G)
V80 (R37_G)
V18x (R364_G, R365_G, R465_G)
V19x (R3511_G, R3517_G)
V22x (R364_G, R365_G)
V235 (R3512_G)
V303p (R3622_G)
V330 (R472_G)
V350v (C350AS_G)
V360 (R4513_G, R44419_G, R4517_G)
V400p (R3621_G, R3622_G)
V535 (R376_G)
V54x (R376_G, R47_G, R472_G)
V550 (R376_G)
V551 (R47_G, R472_G)
V555 (R472_G)
V557 (R4512_G)
V600i (R376_G)
V620 (R376_G)
V635 (R474_G)
V975 (R24_U_xx_2x_xx, R245_U_xx_2x_xx, R26_U_xx_2x_xx, R24_U_xx_3x_xx, R245_U_xx_3x_xx, R26_U_xx_3x_xx)
V980 (R24_U_xx_2x_xx, R245_U_xx_2x_xx, R26_U_xx_2x_xx, R24_U_xx_3x_xx, R245_U_xx_3x_xx,R26_U_xx_3x_xx)
V1050 (R26LD_U)
V1075 (R25221LD_U, R252211LD_U)
V1150 (R25221LD_U,R252211LD_U)
Z3 (R452B_G)

Sponsors links:


4:53 PM, December 31, 2006 Alex57185 said...

Hello Yuet is very fantastic for the
motorola community .

5:23 PM, December 31, 2006 giany911 said...

I have been waiting for my account for 2 days now :). Any way 1 question not related to GOT_Moto, is r4513 dcr available for v360 or no? I can't seem to find it anywhere :(

6:27 PM, December 31, 2006 Anonymous said...

can'get that username and password!what's happening?can someone who downloaded the tool post it for download?it is freeware after all!i want to test it badly!

10:37 PM, December 31, 2006 Matt said...

anonymous, the software authenticates to the GOT server, if you do not have a password and id it will not start.

11:50 PM, December 31, 2006 Matt said...

tested on a V360, succesfully removed the sticky AER firmware.

BTW Yuet, very nice ABR MP.

Thank you for all your help.

12:50 AM, January 01, 2007 Yuet said...

Alex57185, thanks for the comment.

giany911, it looks like a L7 firmware.

anonymous, they decide to distribute GOT_MOTO in this way. I think we should respect it.

matt, congras!

Happy new year 2007 to all!

12:57 AM, January 01, 2007 giany911 said...

Same to you too, keep up the good work :) May 2007 be 10 times better than 2006.

11:54 AM, January 02, 2007 Anonymous said...

Hey yUet,

How long does it usually take for them to process your request and send you your new account.


1:47 PM, January 02, 2007 Anonymous said...

Matt, could You describe how You succesfully remove the sticky AER firmware? Please step by step. What programs do You use, what files do You use.
Bst rgrds, Rek>pth

2:12 PM, January 02, 2007 Yuet said...

It takes about 2 days to get the account. May be longer as I believe more & more people are requesting for the test account.

I believe Matt was using the method described in the post to get rid of the AER.

4:12 AM, January 03, 2007 Anonymous said...

hi yuet! followed ur directions nd did exactly as you said. but after i click on remove blank mode, the phone comes back to the normal way nd the EoR firmware is still there. but if i dont put remove blank mode, the phone is recognised as blank neptune lte2 on rsdlite but neither the full flash abr firmware is getting flashed nor the original eor firmware is getting flashed. i am in a dilema. it is still R4513_G_08.B7.EOR_RB. please help me!


5:43 AM, January 03, 2007 clawmvp said...

hey Yuet i have one question
if i use this tool on a sticky firmware let`s say r4441d.2r (for v3i)
and then i make a monsterpack from my phone the firmware it will be sticky or not ?
thanks in advance

10:04 AM, January 03, 2007 Yuet said...

Srikanth, can you show me screenshot of GOT_MOTO and the log?

clawmvp, the MP will be still sticky if the sticky firmware is used.

12:04 PM, January 04, 2007 Anonymous said...

Hi, Yuet!
And where I can find the post to get rid of the AER? Point, pls!

9:33 PM, January 04, 2007 Anonymous said...

I got an error when trying to unlock my v360 with GOT_MOTO. I managed to repair it with GOT_MOTO but now i have the bootloader 08.A0. My previous version was 08.D0. Can i go back to the 08.D0 bootloader ?
Sorry for my bad english.

10:54 PM, January 04, 2007 Yuet said...

RekGRpth, it's in the post. "Steps to repair PDS and get rid of sticky firmware".

anonymous, 08.A0 is good, why do u want 08.D0? You may want to try the "repair pds" stpes to unlock.

3:39 AM, January 05, 2007 Anonymous said...

i put got_moto nd chose my model nd firmware type nd clicked on 'easy skip TP'. then i go to repair nd click on set 'blank mode'. what appears on got_moto after i click on set 'blank mode' is as follows.

Establish connection to handset
Switch handset to TCMD interface
Switch handset to FLASH interface
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 08D0
Sending RAMDLD to handset
RAMDLD started ok in handset
Read flash backup from handset
Save flash backup
Finded fake sign address: 10004808
Power down handset
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 08D0
Sending RAMDLD to handset
Power down handset

Then i click on repair pds and the following appear then.

Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Read Flash chip type and ID
Flash chip ID detected: 0x00898810
Write PDS zone on flash chip
Rebuild PDS checksums on handset
Write Bootcore zone on flash chip
Power down handset
Rebuild PDS procedure completed ok

Then i click on remove 'blank mode' and the following appear.

Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Try to load backup file
Sending RAMDLD to handset
Power down handset

these are precisely what appear on got_moto when i try to unlock my phone to remove the EOR firmware. after i do all this my phone comes back to the same stage as before and starts up normally. in flash mode it still says R4513_G_08.B7.EOR_RB. please help.


8:16 AM, January 05, 2007 Matt said...

Rek, the instructions are on the top of this page. I just followed it to the tee, i did however have to do another blank mode, repair pds, remove blank mode after I flashed it with Yuet's 1.8 ABR MP.

Srikanth, read the procedure, after
1> blank mode
2> repair pds
3> remove blank mode
4> flash with a different MP compatible with your phone and not an EOR one.

if phone works ok you are done, if it does not start up, repeat 1-3

9:42 AM, January 05, 2007 Yuet said...

Srikanth, please follow what Matt said, and you should use GOT_MOTO client to flash to other MP instead of RSD Lite.

Matt, thanks!

2:29 AM, January 06, 2007 Anonymous said...

its bullshit. they get your email to sell to spam ads, send a software that will screw your phone PDS and you get a rootkit installed under your windows. DONT GET FOOLED!!!

4:56 AM, January 06, 2007 Anonymous said...

but after i put remove blank mode it comes back to the same old normal startup. is it fine? if i flash the abr firmware through got_moto even after this will it work?


5:07 AM, January 06, 2007 Anonymous said...

did exactly as matt said nd even flashed the ABR firmware using got_moto only. but still no use. in flash mode it still shows EOR only. after i did the repair pds nd remove blank mode, clicked on flash/flex nd chose flash handset. then chose te ABR firmware nd then what appeared on got_moto is as follows...

Split input file in codegroups:
Processed 8 codegroups
Establish connection to handset
FLASH Interface established ok
Sending RAMDLD to handset
RAMDLD started ok in handset
Erase flash...
Flashing codegroups ...
Flashing codegroup 'cg1.smg' to 10092000
Flashing codegroup 'cg2.smg' to 11240000
Flashing codegroup 'cg3.smg' to 10040000
Flashing codegroup 'cg4.smg' to 110A0000
Flashing codegroup 'cg5.smg' to 11F80000
Flashing codegroup 'cg6.smg' to 10E60000
Flashing codegroup 'cg7.smg' to 11FE0000
Restarting phone
Done flashing
Operation completed with success

still no change. i dunno wot te hell!


1:43 PM, January 06, 2007 Yuet said...

Srikanth, what's the bootloader of your phone? is it 09.02? can't remember if you have told me.

As matt said, if there's problem after flashing the abr, you should repeat step 1-3. That is, do the followings:

1> blank mode
2> repair pds
3> remove blank mode
4> flash to ABR MP with got_moto client
5> blank mode
6> repair pds
7> remove blank mode

10:18 PM, January 06, 2007 Anonymous said...

my bootloader is 08.D0. wl try again as you said. Thanks!


4:16 PM, January 08, 2007 Anonymous said...

yuet my man! got it! finally got rid of te sticky EOR firmware. now i kno for myself that got_moto really works. its an effort usefully put in i wud say. thanks man. any suggestions wot else can i do 2 my phone?


9:35 PM, January 08, 2007 Yuet said...

congras! Srikanth. there's a lot of things you can do. You can try different MPs, and you can do some moddings yourself. I hope you find this blog useful.

6:10 AM, January 09, 2007 Anonymous said...

I write to GOT_MOTO, from Hotmail,Yahoo and ICQ ten day's ago, they ansver me only on ICQ that acounts are N/A, and nothin more, can somebody help me?

9:01 PM, January 10, 2007 Anonymous said...

i have 2 doubts.
1. is it possible to instal skins for itunes?

2. is it possible to instal FM tuner in my L7?


9:33 PM, January 10, 2007 giany911 said...

Yes you can install skins in iTunes, about the radio I don't think thats possible.

1:26 AM, January 11, 2007 Anonymous said...

Hey yuet! this blog is awesome.. i wanted to ask you about this GOT_Moto..
1)will it work with bootloader 08.DO? if not, how can i change it to 08.A0?..
2)i have your MP 1.8 for my v360 (which is great, R4513_G_08.B7.B7R) should i get a different MP to try this out? or do u think the program would let me repair it with that MP of yours?.. thanks

3:08 AM, January 11, 2007 ChiefSalami said...

I have tried to request access to the GOT_MOTO tool with no luck. Would someone please help me, maybe let me use your login for one day? I just need to fix one RAZR phone and do a repair PDS on it. That's all. You can contact me at chiefsalami2 at hotmail dot com. Thank you so much.

5:31 AM, January 11, 2007 giany911 said...

As I understand GOT is no longer free and accounts are not being made right now. About using another's account, thats not possible since your account works only on your IP.

2:21 PM, January 11, 2007 Yuet said...

Sarah's Angel.
1) it should work for 08.D0 bootloader. I am not sure how to change to 08.A0.
2) it doesn't matter, as long as it is R4513 firmware. BTW, v1.8 should be ABR, v2.0 is B7R.

1:42 AM, January 13, 2007 BoldBob said...

hello guys, bad news

kapersky lab reported a rootkit in GOT_MOTO.exe.

fill zero your hard disks and reinstall windows.

2:30 AM, January 13, 2007 Anonymous said...

hi gianny911 & yuet!
where can i find skins for itunes? i am usin yuetmod 1.8 wit the R4513.ACR MP. i am bugged of seein it in te white background.


3:57 AM, January 13, 2007 giany911 said...
The iTunes ones not the MV.
Look for Steps to use Skins changer.

11:22 PM, January 14, 2007 Anonymous said...

I master reseted my v360v and my mms and wap don`t work anymore. Plus I cannot edit websessions and my shortcuts don`t work, plus sms messages cannot be sent or saved in phone memory. pls help

9:40 AM, January 15, 2007 Yuet said...

hi, what firmware are u using? I suggest you flash a MP to resolve the problem.

2:06 AM, March 01, 2007 Sarah's Angel said...

No More GOT_MOTO..

hey yuet.. i found a tutorial of how to unlock the v360 without testpoint.. it's in spanish and i translated it.. so check it out.. i already tested it and works..

Hope this will be the way to get all v360 versions unlocked..

11:13 AM, March 10, 2007 shoaib said...

this is a monster pack for eor software. ok so enjoy.

7:42 PM, March 22, 2007 Anonymous said...

yuet does this method work on L6 too?

9:53 PM, March 23, 2007 Yuet said...

yes, I think so.

2:18 AM, April 09, 2007 Metallus said...

Yuet can i still use this method if I can find an older version of GOT_MOTO and download it?i really need an account. I never used GOT_MOTO, never had the chance... but if there is such an easy way to unlock moto v360 without TP than why doesn't someone that used this program find this "miracle cure" and make it available for all of us? can my brother unlock his v360v without reflashing it? he's waiting for your 1.9 to use it after he unlock his, but still he would like to keep his current firmware :).btw pls send me any emails at, my address is very small and i use it for spam mail mainly.10q keetp it up. u make the moto modding community very proud.

11:22 PM, April 10, 2007 Yuet said...

metallus, even you get the software, you still have to buy the account, as they authenticate it at their server and they store info about your machine, so you can't use the same account on different machines.

I'd rather do testpoint, than buying the account.

9:54 AM, March 20, 2008 Anonymous said...

GOT_Moto.exe is infected!

5:26 AM, February 13, 2009 hemu said...

hey yuet

first i used to flash my phone and it worked nicely with all monster packs. after some months my phone stopped and i gave it for repairing to motorola service center. they simply changed my bootloader to 08.D0. my firm ware is R4513_G. AER. now tellme what to do. i flashed with yuet 1.9a and it worked but now its network connectivity is bad. my frns cannot call me and i get call drops most of the time. i want to get rid of the sticky firmware. tell me if i have to do testpoint or any other method can be used. i also tried yuet 2 n 3 versions but they are not working on my phone. only 1.9a is working with bad reception.

4:14 PM, July 24, 2009 Motorola mobile unlocking said...

Well during using Motorola mobile unlocking function in our cell phone we must be care about the code during which we are giving to our cell phone.

5:19 PM, September 02, 2010 Computer Support Service said...

Since the process to repair PDS using GOT_MOTO is very risky, is there any other way aside from backing up the existing firmware if something happens wrong? Web