Make MPs compatible with sticky firmwares

Make your MPs compatible with sticky firmwares AER/E0R

Russian hackers announced a great CG1 patch. With this patch, you can make your MPs also compatible with phones with AER/E0R. You don't need to get rid of the sticky firmware any more.

This patch was brought to me by coccolino_dbro. He has tried it on his V360 successfully. I also tried. I flashed to AER, then I can flash successfully to my newly created YuetMod v1.9a MP, which is based on ABR.

Use V360 ABR as an example, you can follow these steps to apply the patch to your MP.
(Assume you already know how to apply RSA patch and compile MP.)
1. split/extract your MP, which has RSA protection removed.
2. use XVI32 to open the CG1 file.
3. press Ctrl + G and jump to hex offset 386A8.
4. replace the Hex values from 477846C0 to 20014770.
5. press Ctrl + G and jump to hex offset A373D8.
6. replace the Hex values from 477846C0 to 20014770.
7. save CG1, then compile a new MP.

Different firmwares have different offsets, please refer to the following patch codes for your firmware version:

V360 ABR: (provided by coccolino_dbro)

[Patch_Code]
000386A8: 20014770
00A373D8: 20014770

[Patch_Undo]
000386A8: 477846C0
00A373D8: 477846C0


===================
V360 ACR: (provided by coccolino_dbro)

[Patch_Code]
000386DC: 20014770
00A37A08: 20014770

[Patch_Undo]
000386DC: 477846C0
00A37A08: 477846C0


===================
L7 ACR_RB:

[Patch_Code]
000386DC: 20014770
00A37A08: 20014770

[Patch_Undo]
000386DC: 477846C0
00A37A08: 477846C0

===================

Discussion thread in www.inbrite.com.

Sponsors links: