Messages: Please use the inbrite.com forum for our discussions & Q&A.

News: It is reported that iTunes 9 is compatible with jailbroked iPhones... Now I got an iPhone 3GS. I will be posting something about it...

Sponsors links:

Thursday, March 01, 2007

Get "S blank neptune LTE2" by flashing

Get "S blank neptune LTE2" by flashing
for V360/L7 R4513 08.A0/08.D0
by guys from forov360
If you have seen my post about Repair S blank neptune LTE2, you know I am exploring the way to get "S blank neptune LTE2" by flashing a special MP. Now the guys in forov360 have achieved it, and it is tested with V360. I think it should work for L7 with 08.D0 bootloader as well, but do it at your own risk.

Tools you need:
1. P2K Easy Tools v3.9 cracked
2. RSD Lite

Steps:

1. Download the correct flash file according to your bootloader version; (download link at bottom of the post.) (you can check bootloader version by turning off the phone and then press and hold * and # keys, then power on your phone.)

2. Open RSD Lite, and turn on your phone in flash mode by turning off the phone and then press and hold * and # keys, then power on your phone;

3. Connect the phone to computer via USB; Open the flash file with the RSD Lite and click 'Start' button.

4. Wait for the flashing process to complete, then the phone will try to restart but it won't turn on as expected;

5. Unplug the usb cable from the phone; Take the battery out for 15 seconds;

6. Connect the usb cable to the phone, WITHOUT BATTERY and it will say 'Unknown device';

7. Disconnect USB cable, put battery back in the phone;

8. Open 'Device Manager' in your PC (right click in 'My Computer' and click in Manage) and connect the usb cable to the phone. It will recognize it as "Flash Interface");

9. The RSD Lite will detect the phone as "S Blank Neptune LTE2". If not detected, try another USB port and repeat step 5-8;

10. Close RSD Lite;

11. Do part 2 or part 3 of this guide, depends on whether you want to remove sticky firmwares or unlock your phone.

If this method doesn't work for you, try my guide Yuet's easy way to get "S Blank Neptune LTE2".

Credits:
The original tutorial can be found in spanish at forov360.com. All credits to Arkangel (Cristian Hinz), r3drum (Brian N Haslop) and Lukas from forov360 for the flash files in this method.
Credit to Sarah's Angel for translating it to English.

Download:
Flash file for 08.A0 bootloader: [4shared]
Flash file for 08.D0 bootloader: [4shared]

Sponsors links:

26 comments:

2:45 PM, March 14, 2007 Nacho said...

Hi Yuet! Need some help here...

I did followed all the steps in this tuto, and now my phone is always detected as "Unkown device". I've been trying for a while.

What should I do? I can go into flash mode by pressing # and * and putting the battery but that's all I can do with the phone.

2:49 PM, March 14, 2007 Nacho said...

Update: if I connect the phone to the usb in flash mode RSD Lite detects it as "S Flash Neptune LTE2"

10:55 AM, March 15, 2007 Yuet said...

nacho, try my method and the new method by lord_dizzy. You should be able to flash using p2k easy tool.

7:42 AM, March 18, 2007 Andy said...

Hello Yuet! I am in a bit of trouble... I followed your tutorial, RDS Lite finished flashing, I turned the phone off, took off the battery, connected the usb to my laptop and windows said Unrecognized USB Device. I've put the battery back, connected my V360 back to the pc and again Unrecognized USB Device (not a Flash Interface as it should be).

And now the phone is dead, no turning off, no bootloader, no nothing..thus cannot flash it again.
What can i do?

12:03 PM, March 18, 2007 Yuet said...

andy, if this method doesn't work, try another 2. Now if RSDlite doesn't detect the phone at all, press and hold * and # keys, and press and hold red key, and hold as long as you can. You should get into bootloader mode if you are lucky.

12:06 AM, March 22, 2007 Andy said...

Hey Yuet! Me again. So I finaly got back to bootloader screen as you said and installed S Blank Neptune, then your MP and when I should power up my phone it just shows the spalsh screen, then turns off...

Any ideeas what can I do?

12:38 AM, March 22, 2007 Yuet said...

andy, you need to "repair pds" after your get s blank neptune lte2. Did u do that?

9:41 PM, April 01, 2007 C said...

****.... I got critical error 84 after flashing... Any idea what to do now? I took the 08.d0 pack, and i have bootloader 08.d0 with r4513_g_08.b7.aer

11:47 PM, April 01, 2007 Yuet said...

you should use the 08.A0 file.

If no success with this method, try my method. flash to YuetMod v3.2 first, then my BlankNeptuneLTE2 flash.

3:20 AM, April 02, 2007 C said...

Ok, no matter where i am now.. i dont seem to be moving forward at all...

Im sure i can flash to yuet 3.2 and then blank, but what should i do after that?

I've tried flashing to R4513_G_08.B7.5AR, yute 3.2 and YuetModv18_V360_AER, but the only thing that happened then was either that the buttons flashed blue for a second, or for a few seconds while i got a helomoto-screen (or whatever it said)

im downloading the 08.a0 solo flash right now, and also Yuetmod 2.2.1 .

But i think im going to wait with flashing anymore before i figure it out more, as i dont know anyone else with a v360, so i guess im out of luck if my battery dries up... :/

Any help would be appreciated!

(oh, and everytime i flashed with 08.A0_08.D0_BlankNeptuneLTE2-by-Yuet.shx i got error 84... can that have something to do with everything?)

9:48 AM, April 02, 2007 Yuet said...

after you got s blank neptune lte2, you should repair pds, b4 flashing a mp.

Getting error 84 doesn't matter, as long as you get s blank neptune lte2 after that.

4:13 PM, April 03, 2007 zoryk said...

I flashed this then i got USB device not recognized, with or without the battery. Now i can't load in bootloader mode either? what can i do??

3:59 AM, April 04, 2007 (-z3r0-)™ said...

zoryk try removing the battery and pressing the * + # and put the battery back it will show the bootloader it worked for me...

3:56 PM, April 04, 2007 Yuet said...

or try to press & hold *, # and Power for a few minutes. and try other usb ports.

3:57 AM, April 22, 2007 Marcos said...

Will this method work on a R4513 L7 BL 08.D0?

3:02 PM, April 23, 2007 Yuet said...

It is not very reliable for 08.D0. I think there's 50-50 chance it will work.

4:41 PM, May 29, 2007 charlekups said...

Yueto can i change my bootloader to 08.A0?thanks...i have a 08.DO..

2:14 PM, June 01, 2007 Yuet said...

yes, I think so. read this post.

1:05 PM, February 01, 2008 Anonymous said...

Hello Yuet, I need a lot of help!!! My name is Thomas from Georgia in the US. I've been through almost every forum, trick and work you've posted. I have a v360 and it recently died on me. I've tried bootloader, tp, s blank neptune lte2 and i fail everytime. When im on P2K it tells me
Connected to phone
Bootloader Version:0300
Sending loader to phone...
ERROR: Recieving READY
ERROR: Send Loader failed (2)
RSD does similar, it gets to the flashing and fails right before it. Ive tried to repair the PDS, Ive tried and held *+# for an astounding 30 minutes during a whole family guy show but nothing works. Please help me man, I think you've met your match with this one Yuet

11:31 AM, February 02, 2008 Yuet said...

Thomas, please come to www.inbrite.com forums to discuss. I will be there. It is easier to do it in a forum than this blog comment.

10:24 PM, May 09, 2010 Costi said...

Hello,please can you help me? I tried to unlock on Motorola V360 and I put a wrong boot loader file instead of 08.A0 I put 08.D0 . I did not back up the original soft. Now my phone it is in boot menu. I tried to put some firmware but it is not working. Phone have boot loader firmware 08.A0., it is locked in O2 Ireland.It is there something what I can do now? Thank you!

10:56 PM, May 10, 2010 Yuet said...

Costi, please follow this page to change the bootloader to 08.A0.

3:23 AM, May 12, 2010 Costi said...

Thank you! I did all again and now my phone it is working. Thank you again!

4:59 AM, May 13, 2010 Costi said...

I did all again and my phone it is working!:) Thank you very much!

11:51 PM, February 19, 2012 Anonymous said...

Can't download the A0 boot loader file.

3:23 PM, April 29, 2012 XToff said...

Hi, I want to unlock my old v360/L7.
But I need 08.D0 bootloader and I can not find it...

Could someone post me the file

Thanks


yuetblog.blogspot.com Web